How to Change The Code On The Hampton Bay Ceiling Fans

provillus360 — Sat, 21 Jan 2012 09:04:00 +0000

The good Hampton bay ceiling fans also come with remote control. This is based on the price quality of the product clients are buying. The presence of some radio wave can disturb the interference of the remote control and its receiver on the fan. When this problem occurs, the simple way to rectify this problem is by changing the code of the control. Having in mind that both the remote control and receiver have switch control connected to each other by signals. The code can be changed by the action of the switches.

Step One

Hampton Bay fans come with many features. Ensure that power supply is switched off. Though one will not work on wire connection. To be safer it is better to stop the flow of current to keep electrical rules complete.

Step Two

Put a ladder in a good position so as to get to the point where the motor case is. The casing of the motor is held and turn clockwise countering its direction. Ensure to remove all screws that may hold back the casing when removing. There are holes and notches at the point of the screw. Assemble all the notches and ensure they are perfectly loosened to lower the part needed.

Step Three

The receiver of the remote control of hampton bay fans is always found at the side of the motor. With the attachment of the motor is found the small switch. The battery covers used for its protection is removed by sliding it. The pack of the battery are found switches of the remote and the receiver. For the process to work perfectly the switches of the remote and the receiver must be the same.

Step Four

It is important to adjust the position of the regulators of the controls in like manner. To achieve this action simply turn the direction front and back. Fix the regulators back in the normal way it was placed to ensure a good working action. This will make all coding contact to be reinstate and ensure proper functioning. This is the only process that can be used to justify the changing system of the receiver and the remote control.

Step Five

After achieving the smooth change of the coding process, the screw that was removed from the motor housing is reassembled. The process of coupling will ensue immediately to fix back all part that was dismantled to achieve a success of the changing code. The canopy is in same manner turn clockwise to lock it. The brackets are fixed on position with all screw attached to all points of contact. Following all the part is properly fixed, the power main is switched on to see if the process works perfectly. Once the power switch is made to come on, the operation will ensue from the remote control. This will show how effective the code changing process was changed. The remote controls is used to operate the Hampton bay ceiling fans. The process will begin to obey the command of the remote control button.

Provillus Review

How to Change The Code On The Hampton Bay Ceiling Fans